2014-2018 Ram Ecodiesel 3.0L DPF DEF & EGR Delete Kit

Description

2014–2018 RAM 1500 EcoDiesel 3.0L – Full DPF / DEF / EGR Delete Kit

This complete delete package removes all emissions-related restrictions from your 3.0L EcoDiesel engine, providing more power, better reliability, and improved fuel economy. This service includes ECU programming + hardware delete kit + prepaid shipping label for your ECU.

What Is an EGR Delete?

The EGR (Exhaust Gas Recirculation) system circulates hot exhaust gases back into the intake.
Over time this causes:

• carbon buildup

• clogged intake runners

• reduced performance

• rough idling

• engine wear

Deleting the EGR stops dirty exhaust from entering the intake, keeping the engine clean, powerful, and more reliable.

What Is a DEF / SCR Delete?

DEF (Diesel Exhaust Fluid) is injected into the exhaust system to reduce emissions.
However, the EcoDiesel SCR system is known for:

• NOx sensor failures

• DEF pump failures

• constant “Service DEF System” warnings

• limp-mode situations

A DEF delete disables the entire DEF/SCR system, eliminating all DEF-related problems permanently.

What Is a DPF Delete?

The DPF (Diesel Particulate Filter) traps soot.
When the filter cannot regenerate properly, it causes:

• high exhaust backpressure

• poor fuel economy

• reduced power

• turbocharger stress

A DPF delete removes the restriction and stops all regeneration issues.

Benefits of a Full Delete (DPF / DEF / EGR)

• +40–70 HP increase (depending on tune)

• Improved throttle response and power delivery

• Lower exhaust temperatures

• No more limp mode caused by DEF, EGR, or DPF faults

• Longer turbo and engine life

• Greatly improved fuel economy

• Eliminates DPF soot buildup / DEF heater / NOx sensor / EGR valve failures

How the Process Works

1. Place your order

Once the order is submitted, FixECM will send you:

• A prepaid shipping label (no cost to you)

• Instructions on how to remove your ECU

2. Ship your ECU to FixECM

You simply drop off the ECU at any shipping location using the prepaid label.

3. We perform the delete programming

Your ECU will be:

• Flashed with the DPF/DEF/EGR delete tune

• Bench-tested to ensure full communication

• Prepared for plug-and-play installation

4. We ship everything back

You will receive:

• Your tuned ECU

• The full hardware delete kit

• Installation instructions

5. Reinstall and drive

No dealer visit required.
No additional programming needed.
Completely plug-and-play.

Turnaround Time

• 1 business day in-house tuning time

• Total turnaround usually 3–5 business days depending on shipping distance

What’s Included

• Full emissions delete tune (DPF/DEF/EGR OFF)

• Hardware block-off plates & delete kit

• Prepaid shipping label (ECU to FixECM)

• Return shipping included

• Bench-test & verification

• 1-Year warranty on programming

>>Need a replacement ECU/ECM? Check our replacement units available!<<

>>Check Our Stage1 Tuning Service!!!<<